Taylor Rental Center of Depew, NY

• Ratchet knob indicates forward and reverse.
• Die heads snap in from both sides and lock in place.
• 00-R is for smaller dies, 12-R is for larger dies
• rate is the same for either one 

Tax and damage waiver is not included in the price.

Containing :1 1/4" SUPERCUT ratchet handle (70840). 1/2", 3/4", 1", quick change die heads (70912, 70913, 70914). All packed in a plastic carrying case.

We offer delivery, trailer is extra!

Load tests to 72,000 lb. before destruction.

Use with 5' wide scaffolding 

This wheel is heavy duty. Works very nicely in highly demanding rental operations. The stem this caster wheel is 1.375" OD (#6 tube) with a 4 inch length. It has a double safety margin built into the load rating. Our wheel is heavy duty, load tested to handle 500 lb with an 8-to-1 safety margin. It’s cast iron frame has a rubber exterior that is two inches wide and over an inch thick. There are ball bearings in the pivot mechanism to handle high loading. It’s double locking, so the wheel cannot turn or rotate when locked. Finally, it’s fitted with two zinc-plated grease fittings to keep things rolling smoothly.

• Light weight and balanced for less operator fatigue
• Smooth start decompression valve reduces start up force by 70%
• Powerful 73cc & 81cc engine
• 5-stage filtration system
• Fully adjustable blade guard
• Water kit and garden hose connection included
• Sure-grip rubber coated handles
• Optimized cooling from air flow and fuel compensator-reduces cylinder temperature
• Reinforced hood fastening system keeps the air cleaner cover secure
• Better engine tuning allows for minimal maintenance
• Modified decompression valve, carburetor and improved ignition coil for fast starting
• Improved fuel consumption and increased cutting efficiency
• Quick action blade guard adjustment and belt tensioning
• Proven mass dampening system that greatly reduces vibration
• Computerized ignition with digital timing control for easy starting, blade
• RPM control and consistent power

• Rolling table will accommodate 16" blocks
• Portable model with 14" blade capacity
• Rounded blade guard with splash proof protection
• Universal cutting table with water drain holes and centered wood block eliminates cutting through tables
• Side-Mounted handles for balanced lifting load
• Vacuum hookup optional for dust-free cutting
• 1/4" steel arbor wrench with saw-mounted wrench holder
• Adjustable cutting head can be used manually or locked in a fixed position
• Quick adjusting heavy-duty bearing assemblies for easy blade alignment
• Idea for cutting pavers and brick
• Shown with optional expandable ProCart (INLCUDED)
• Shown with blade (NOT INCLUDED)

Revolutionary aircraft grade aluminum frame with dual handles

50 mesh inlet filter

Adjustable pressure unloader

Low oil shutdown

Pneumatic tires

Dual padded shock absorbing feet

3/4" cold-rolled steel axle

Honda GX Series commercial grade engine

We offer delivery, trailer is extra!

One gallon gas charge will be added to order

• Quick and easy depth adjustment for efficient operation
• 4.2 gallon capacity for less downtime
• Adjustable handle and improved center of gravity for increased control when cutting
• Includes tool-less water attachment kit for efficient cutting

We offer delivery, trailer is extra!

Click here for information on Makita 14" saw

Blade is extra.

Built to meet the rigorous demands of the cleaning professional or anyone who expects the most out their machine. Perfect for deck cleaning, wood restoration, paint preparation, graffiti removal and all other professional cleaning services.

FEATURES

• HONDA® GX270 engine with low oil shutdown feature
• Reliable AAA industrial triplex plunger pump
• 3/8-in. x 50-ft. Monster Hose hot water hose with quick connect fittings
• Welded steel frame construction with powder coated finish for durability and corrosion resistance
• 13 in. Premium tires for ease of maneuverability across various terrain
• 5 Quick connect nozzle tips: 0°, 15°, 25°, 40° and soap to use for a variety of cleaning applications

SPECIFICATIONS

• HOSE LENGTH 3/8" X 50 FT
• OPERATING PRESSURE 3800 PSI

Tax and damage waiver is not included in the price.

One gallon gas charge will be added to order

• SJS™ technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
• Rubber shield helps keep debris away from operator and from entering the motor
• Powerful 15.0 AMP motor delivers 3,800 RPM for the most demanding applications
• Removable base for a closer edge-to-edge cut
• Rubberized handle for increased comfort
• AC/DC switch for use with alternative power source
• Tool base adjusts allowing up to 5" cutting depth; best for cutting split face block when building retaining walls
• Guide wheels on the tool guard ensure smooth traveling of tool over surface material when base is removed for cutting closer to walls

• Make crisp, accurate stripes with the Rust-Oleum® Professional Striping Machine. Its heavy-duty wheels work on a variety of terrains and make applying striping paint fast and painless. Just collapse the handle to take it anywhere.
• Makes it easy to apply sharp, crisp, consistent lines
• Adjustable stripe width from 2" to 4"
• Heavy-duty wheels

• Ideal for homeowners and small contractors.
• Steel Drum and Replaceable bolted in blades.
• Powder coat finish design for heavy-duty use.
• With a versatile design, the Max Mix can be used as a wheelbarrow to transport concrete or as a pedestal-style mixer.
• Built-in enclosed cast iron gear reducer drive system for life extension.
• 3 cu. fu. capacity (80 lt)
• Easy Packed in a 26"x 36" x 26" Box.
• Operating Weight lbs. (kg): 128 lbs. (58).
• Power: 1/3 HP Electric Motor.
• Voltage: 110V/60Hz
• Drum Speed: 23 RPM
• Wheels size 10" (25 cm) Diameter 2 ½" (6.3 cm) Width

• Durable 1/8" thick drum with heavy-duty lip

• High abrasion welded steel drum for long life and high performance

• 14 gauge steel, ventilated engine shroud

• Steel hood latch (not rubber)

• Reinforced t-frame with 4-gussets for stability

• 3" x 4" square steel yoke

• Oversized dump wheel with handle grip for easier control while discharging material

• Cast-iron pinion tilting

• Multi-position dump latch

• Heavy-duty safety chain

• 2" ball hitch tow tongue

• Heavy-duty, one-piece, cast-iron ring gear for longer life

The Duo-Fast ENC-5418A Electric Stapler is used for carpet installation, upholstery, and picture frame assembly. The tool is ergonomically designed for easy one-hand operation. It features a bottom loading magazine, with a capacity of 84 staples. For use with the Duo-Fast 5400 series narrow crown staples.

The CF325 7.2-Framing Nailer is designed to load and drive fasteners 2 - 3-1/4 in. in length with gauges of 0.113, 0.120 and 0.131. It is finished in a bright orange for high visibility at cluttered job sites, and it's equipped with a depth-of-drive adjustment that resets on the fly. This nailer comes supplied with a lithium-ion battery that charges in as little as 30 minutes on the included charger. The battery's extended life lets you drive up to 6,000 nails between charges.

This lightweight 22° 3-1/2 in. Full Round Framing Nailer weighs just 7.3 pounds, providing the power you need in a tool that’s easy to use all day. A selectable trigger with trigger lockout allows for restrictive or contact actuation mode. Tool-free adjustable depth and drive allow for proper setting of nail heads with ease. A low nail lockout indicates when to reload the tool. With an over-molded grip for comfort and control, this nailer is ergonomically friendly. A reversible rafter hook lets you hang it to the left or right. This nailer drives full round head, plastic collated nails.

• Drives 15 GA angled finish nails from 1-1/4" to 2-1/2" length
• Tool-free jam release mechanism for easy nail removal
• Dial-A-Depth™ control for precise countersinking of nails
• Rear air exhaust
• Includes: Nailer, 1/4" Air Fitting

USES: INTERIOR FINISH AND TRIM, EXTERIOR FINISH AND TRIM, FURNITURE, CABINET WORK, STAIRCASES, FLOOR UNDERLAYMENT, CARPET INSTALLATION, CRAFTS

• Tool-free adjustable exhaust conveniently directs exhaust away from the user
• Bottom load magazine for fast loading and easy jam clearing
• No-mar tip protects work surface
• Kit includes: Stapler, 1/4" Air Fitting, Sample Staples, Carrying Case and Oil

USES: INTERIOR FINISH AND TRIM, EXTERIOR FINISH AND TRIM, FURNITURE, CABINET WORK, STAIRCASES, FLOOR UNDERLAYMENT, CARPET INSTALLATION, CRAFTS

• Powerful Motor: Uses 18ga staples and can drive 1-1/2 in. staples into solid oak
• Oil-free motor: Eliminates daily oiling and oil splattering on the work surface
• Dry-fire lockout feature extends the motor life and prevents misfires
• Hex Grip micro-texture grip: Enhancing micro texture for maximum user comfort
• The no-mar pad keeps work surface clean of tool marks
• Bottom load magazine allows for quick and easy staple loading
• Tool-free selectable trigger allows user to conveniently and quickly change between contact and sequential firing modes without using tools
• A lifetime service agreement with registration within 90 days of purchase (begins after the warranty period expires)
• Includes hardcover carry case

THIS COIL ROOFING NAILER HAS A DURABLE ALUMINUM HOUSING AND A ONE-DOOR LOADING SYSTEM FOR FAST RELOADING. IT HAS A DRY-FIRE LOCKOUT TO PREVENT DRY FIRING AND TO ALERT THE USER TO RELOAD THE MAGAZINE. DEPEND ON THIS COIL ROOFING NAILER FOR DURABILITY AND COMFORT.

• Lightweight aluminum housing for job site durability
  
• Zero nail lockout feature eliminates dry firing and indicates when to reload the magazine
  
• Nosepiece features carbide inserts for long-life performance
  
• Aggressive wear guards and skid pads protect the tool from damage on abrasive surfaces
  
• Quick-set adjustable depth guide sets nails to desire depths quickly and conveniently
  
• Patented single-action side load canister for fast, one-step nail loading
  
• Adjustable shingle guide for quick shingle spacing
  
• Overmolded grip for comfortable use

MODEL ST-18 FOR CARPET AND UNDERLAYMENT. DUO-FAST STAPLER MODEL ST-18 FOR CARPET AND UNDERLAYMENT. Shoots staples from 7/8" to 1-1/8" in length

THIS HARDWOOD FLOORING CLEAT NAILER KIT IS USED FOR FLOOR NAILING. PNEUMATIC POWER DRIVES NAILS AND CLEATS INTO THE WOOD SURFACE QUICKLY AND EFFICIENTLY. DEPEND ON THIS HARDWOOD FLOORING CLEAT NAILER KIT FOR STABILITY AND A COMFORTABLE GRIP.

• High-speed mallet actuated pneumatic operation increases productivity over manual methods
• Extra-wide composite base plate for added stability (1/2" and 3/4" base plates included)
• Long reach handle for improved comfort and control (short handle optional)
• Kit includes: Nailer, Graphite Mallet

Used for Laminate, Laminate Wood, and Engineered Hardwood Flooring Application
Adjustable knobs allow for tool-free adjustment from 1/4" - 1/2" flooring

High visibility tongue engagement for faster installation and non-marring profile tips to prevent floor scratches

Oil-free operation requires no regular maintenance and eliminates the risk of oil stains

Swivel air fitting with internal filter improves maneuverability

Ultra-quiet rear exhaust directs air away from the user

Non-marring profile tips to prevent floor scratches

The rear exhaust directs air away from the user