Taylor Rental Center of Depew, NY

The 14" MM4® 4-Stroke Power Cutter (model EK7651H) is the world's first 4-stroke power cutter. The EK7651H is another innovation in Makita’s expanding line-up of concrete solutions.

The 4-stroke EK7651H delivers several advantages over 2-stroke. No oil mixing is required, so contractors get simplified operation and no more engine failure due to improper mix. The MM4® 4-stroke engine eliminates the need for separate mixed oil/fuel can.

For easier starts, the automatic engine decompression valve is engineered into the cam gear to reduce pull-start force by 40%. The EK7651H also has lower noise at 92.7dB(A), smoother idle for continuous operation, and lower fuel consumption at only .45 gallons per hour.

• 14" & 18" Blade Capacity
  
• Heavy duty design, but lightweight enough for two people to lift and carry
• Cyclone air filter
• Easy to read built-in depth indicator
• Slip-on blade guard
• Heavy duty handles do not rattle like competitor handles
• Left or right hand sawing
• Single ribbed belt

Simultaneous dump and hydrostatic drive capability allows for feathering of load in forward and reverse.

Operator’s platform and control system allow for comfortable and convenient operation of the unit.

16ft3 (453 L) capacity

Power supplied through heavy duty hydraulic pump and two high efficiency drive motors.Simple, clean control panel.

Excellent traction and control with heavy-duty welded chassis

• Powerful 14 AMP motor delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications
• Anti-Vibration Technology (AVT®) is an internal counterbalance system that greatly reduces vibration
• Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more precision and better accuracy
• Variable speed control dial enables user to match the speed to the application for greater versatility
• "Soft no-load" function automatically reduces the speed of the motor when not in use which helps increase tool life and performance

This bull float is made from lightweight magnesium, and is used to level and smooth the surface prior to finishing. Magnesium floats provide a smoother finish than wood floats

Dual drum drive and articulated steering for extremely accurate control. Front drum vibration with static rear drum leaves a quality asphalt finish. A high exciter frequency allows compaction at faster speeds, even coverage which still delivering excellent results

Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. Large capacity polyethylene water tank located within the front lift cage for protection and is semi-transparent for easy check of the water level. Large in-tank water filter

Manual also available

• Powerful 9.0-amp motor: Delivers 0-1,500 RPM/0-24,000 BPM and 0-3,500 RPM/0-56,000 BPM
• Anti-Vibration System (AVS): Delivers maximum comfort by minimizing vibration
  
• 2-Mode operation: Hammer drill/drill for maximum versatility in wood, metal and concrete
  
• 2-Speed gear box: Select the correct drilling speed for the material and accessory
  
• Self-stopping brushes: Protects the motor and increases the life of the tool
  
• 360° Locking side handle with depth gauge: Permits maximum maneuverability and control

• POWER : 14 AMP motor delivers 950 - 1,900 BPM and 25.5 J/ 18.8 ft.lbs. of impact energy
• CONTROL : Variable speed control dial to match the speed to application.
• PERFORMANCE : Constant speed control to maintain speed under load
• DESIGN : L.E. D. service lights notify user before brushes need to be replaced, switch failure or cord damage
• INCLUDES : Bull point, bit grease and case

• 35-in. stand-over height means you'll never lift another bag above the belt
• Integrated bag opener for easy drop-and-fold opening of your favorite dry mix
• Fully-adjustable water dial allows for customized water flow for the desired mixture
• An all-electric, water-sealed motor with both forward and reverse settings to give you complete control
• Attached secondary hose for quick, easy, and convenient clean up
• Electric drivetrain with the power to chew through 40 bags of mix per hour
• 14 gauge high-strength steel construction stands up to anything you need to throw at it
• 330-degree pivot system allows for precision and adjustability on any work site
• Patented auger and chute move along any mixture to deliver it where it ft.s needed
• Marathon flat-free tires mean you'll always get where you're going.
• Includes expandable hopper to store more mix

• Light weight and balanced for less operator fatigue
• Smooth start decompression valve reduces start up force by 70%
• Powerful 73cc & 81cc engine
• 5-stage filtration system
• Fully adjustable blade guard
• Water kit and garden hose connection included
• Sure-grip rubber coated handles
• Optimized cooling from air flow and fuel compensator-reduces cylinder temperature
• Reinforced hood fastening system keeps the air cleaner cover secure
• Better engine tuning allows for minimal maintenance
• Modified decompression valve, carburetor and improved ignition coil for fast starting
• Improved fuel consumption and increased cutting efficiency
• Quick action blade guard adjustment and belt tensioning
• Proven mass dampening system that greatly reduces vibration
• Computerized ignition with digital timing control for easy starting, blade
• RPM control and consistent power

• Rolling table will accommodate 16" blocks
• Portable model with 14" blade capacity
• Rounded blade guard with splash proof protection
• Universal cutting table with water drain holes and centered wood block eliminates cutting through tables
• Side-Mounted handles for balanced lifting load
• Vacuum hookup optional for dust-free cutting
• 1/4" steel arbor wrench with saw-mounted wrench holder
• Adjustable cutting head can be used manually or locked in a fixed position
• Quick adjusting heavy-duty bearing assemblies for easy blade alignment
• Idea for cutting pavers and brick
• Shown with optional expandable ProCart (INLCUDED)
• Shown with blade (NOT INCLUDED)

• Quick and easy depth adjustment for efficient operation
• 4.2 gallon capacity for less downtime
• Adjustable handle and improved center of gravity for increased control when cutting
• Includes tool-less water attachment kit for efficient cutting

We offer delivery, trailer is extra!

Click here for information on Makita 14" saw

Blade is extra.

• SJS™ technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
• Rubber shield helps keep debris away from operator and from entering the motor
• Powerful 15.0 AMP motor delivers 3,800 RPM for the most demanding applications
• Removable base for a closer edge-to-edge cut
• Rubberized handle for increased comfort
• AC/DC switch for use with alternative power source
• Tool base adjusts allowing up to 5" cutting depth; best for cutting split face block when building retaining walls
• Guide wheels on the tool guard ensure smooth traveling of tool over surface material when base is removed for cutting closer to walls

• Ideal for homeowners and small contractors.
• Steel Drum and Replaceable bolted in blades.
• Powder coat finish design for heavy-duty use.
• With a versatile design, the Max Mix can be used as a wheelbarrow to transport concrete or as a pedestal-style mixer.
• Built-in enclosed cast iron gear reducer drive system for life extension.
• 3 cu. fu. capacity (80 lt)
• Easy Packed in a 26"x 36" x 26" Box.
• Operating Weight lbs. (kg): 128 lbs. (58).
• Power: 1/3 HP Electric Motor.
• Voltage: 110V/60Hz
• Drum Speed: 23 RPM
• Wheels size 10" (25 cm) Diameter 2 ½" (6.3 cm) Width

• Durable 1/8" thick drum with heavy-duty lip

• High abrasion welded steel drum for long life and high performance

• 14 gauge steel, ventilated engine shroud

• Steel hood latch (not rubber)

• Reinforced t-frame with 4-gussets for stability

• 3" x 4" square steel yoke

• Oversized dump wheel with handle grip for easier control while discharging material

• Cast-iron pinion tilting

• Multi-position dump latch

• Heavy-duty safety chain

• 2" ball hitch tow tongue

• Heavy-duty, one-piece, cast-iron ring gear for longer life

• Efficient 15 AMP motor with improved hammer mechanism delivers 46.5 ft.lbs. of impact energy to handle the most demanding applications
  
• Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
  
• Fixed movement handles for more control and better accuracy
  
• Automatic brush cut-off protects commutator from damage for longer tool life
  
• L.E.D. power light indicates switch failure or cord damage
  
• AC/DC switch for use with alternative power source